How Bar Soap Is Made: The Cold Process Method Explained
Every true bar of soap, from the cheapest to the most luxurious, is made by the same chemical reaction. The cold process method is the traditional way of doing it by hand.
What soap actually is
Soap is what you get when fats or oils react with an alkali. For bar soap the alkali is sodium hydroxide, commonly called lye. The reaction is called saponification, and it turns oil and lye into two new things: soap and glycerin.
How cold process soap is made
- The oils are measured. Olive, coconut, shea butter and others, each chosen for what it gives the bar: hardness, lather or a creamy feel.
- The lye is dissolved in water. This is weighed precisely, because the amount has to match the oils.
- The two are blended. Lye water is stirred into the oils until the mixture thickens to "trace", the consistency of thin custard.
- Scent and extras go in. Essential oils, clays, botanicals or milk.
- It is poured into a mould and left for a day or two to set.
- It is cut into bars and cured for four to six weeks.
Is there lye in the finished soap?
No. In a properly made bar all of the lye is used up in the reaction. Soap makers add a little more oil than the lye can convert, called superfatting, which guarantees it.
Why soap has to cure
During curing the remaining water evaporates. A cured bar is harder, milder and lasts much longer in the shower than a fresh one.
Why it is called "cold" process
No outside heat is used to cook the soap. The reaction makes its own warmth. Hot process soap is cooked, and melt-and-pour soap is a ready-made base that is simply melted and shaped.
What that means for the bar you buy
Cold process bars keep the glycerin that forms naturally, and each batch varies a little in colour and pattern. To make one last, see how to make bar soap last longer.